Adp-160er Schematic ❲2026❳

+4.8V DC Standby Rail at 1.5A (Powers the console's standby chipsets)

+4.8V at 1.5A (Standby rail), +12V at 13A (Main system rail) Total Output Power: Approximately 163.2 Watts max

: +4.8V DC up to 1.5A (powers the Southbridge, system controller, and physical power button). Adp-160er Schematic

If the main ceramic fuse is open, . A blown fuse almost always indicates a dead short further down the line on the primary side. Check the bridge rectifier, the Active PFC MOSFET, and the main switching transistors for a drain-to-source short circuit. Failing Bulk Capacitor

: Specifically used in Sony PS4 Slim consoles (such as the CUH-2115 series). Input Rating : Universal 100V–240V AC, 50/60Hz. Total Max Wattage : Approximately 165 Watts . Output Rails : Check the bridge rectifier, the Active PFC MOSFET,

The main bulk capacitor can hold over 300V DC long after the power cord is unplugged. Always verify the voltage with a meter and safely discharge it using a high-wattage resistor tool before touching any component.

: It maps out the electrical connections, voltage rails, resistors, and ICs for the PS4 Slim power supply. Total Max Wattage : Approximately 165 Watts

Before diving into the schematic details, it is important to understand the operating parameters and constraints of this power supply module.

The ADP-160ER schematic consists of various components, including: