Bx60 Battery Charger Instructions High Quality - Bradex

Connect the clamp to the negative terminal of the battery (or a heavy metal part of the engine block if the battery is still in the car). 3. Select Your Settings

Always operate the charger in a well-ventilated area. bradex bx60 battery charger instructions high quality

Disclaimer: Always refer to the official Bradex BX60 manual provided with your specific model year, as LED codes and button layouts may vary slightly. When in doubt, err on the side of caution. Connect the clamp to the negative terminal of

If the ERROR light turns on, or the needle does not move, the clamps might be reversed. Disconnect immediately and swap positions. Disclaimer: Always refer to the official Bradex BX60

Connect the charger clamp to the Positive (POS, P, +) ungrounded post of the battery.

Integrated protection against overloads, short circuits, and reverse polarity. Crucial Safety Precautions

Place the Bradex BX60 charger as far away from the battery as the DC cables permit. Never place the charger directly above or below the battery being charged. Step 2: Connect the Clamps Proper polarity is critical to prevent short circuits.