Using the tool requires the printer to be in a specific "Service Mode" to communicate with the software:
Download the Canon Service Tool v1074 zip file and extract it to your desktop.
The tool cannot communicate with the printer. Check USB connectivity and ensure you are in Service Mode.
Click the button located immediately to the right of the dropdown. Reset Waste Ink Counter: Move down to the Ink Absorber Counter section. Ensure the counter value dropdown is set to 0% . Click the corresponding Set button. canon service tool v1074
Release both buttons. The power light should stay green, indicating it is in Service Mode. 2. Clear Ink Counter with the Software
The printer does not possess a physical sensor to detect when these pads are saturated; instead, it relies on an internal digital counter embedded in the EEPROM. Once this counter reaches 100%, the printer locks down, displaying error codes such as , 1700 , or P07 , accompanied by alternating flashing green and orange lights.
This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later. Using the tool requires the printer to be
This prints the current state of the EEPROM, providing a baseline before performing any maintenance.
This content is designed for advanced users, printer technicians, and IT administrators who require a thorough understanding of the tool's mechanics, capabilities, and risks.
Before the tool can "see" your printer, you must manually enter . While steps vary by model (like the MG or G-series), the general process involves: Power Down : Ensure the printer is completely off. Click the button located immediately to the right
Canon Service Tool v1074 is a maintenance utility specifically designed to reset the waste ink absorber counter ("pampers") on several Canon PIXMA printer models, most notably the Clear Ink Counter:
Reads, writes, and clears printer configuration data.
This is a guide for educational purposes. , including the potential for voiding your warranty or causing permanent damage if not used correctly.
A small pop-up box stating "A function was finished" should appear. Click OK.