Skip to main content
The Deli DL581PW is a robust, well-built tool for presenters, hampered only by a confusing software ecosystem. While a direct "click-here" link would be ideal, the reality is that you will likely need to dig through the official support portal or request the file from Deli customer support directly. Once installed, however, the device transforms from a basic clicker into a professional-grade presentation controller.
: First, pair the printer via your PC’s Bluetooth settings. Once paired, run the driver installation file. During the setup, choose the "Bluetooth port" when it asks for the connection type. The installer should then automatically create the necessary port for printing.
This usually happens if the wrong driver model was selected. Uninstall the driver and reinstall, specifically choosing the DL-581PW profile.
, the device will automatically stop working until it cools below deli dl581pw driver download link
Select USB as the communication interface. The installer will auto-detect the active virtual USB printing port (e.g., USB001).
: Check your computer's Device Manager. If the printer is showing up incorrectly as "USB Printing Support" with a yellow exclamation mark, you need to force a reinstall. Unplug the printer, delete any old or "unspecified" printer entries from the "Printers & scanners" settings, reinstall the latest driver from the links above, and then plug the printer back in.
Some fraudulent websites rank highly for this keyword. links from: The Deli DL581PW is a robust, well-built tool
The Deli DL581PW is a portable, wireless thermal label printer primarily used for:
Plug the USB cable back into the computer when prompted by the installer. The installer should auto-detect the virtual USB port (e.g., USB001 ).
| Issue | Solution | |-------|----------| | Driver won’t install (error 0x00000002) | Run installer as Admin. Disable driver signature enforcement (restart PC → F7 on boot). | | Printer prints blank labels | You are using the wrong label side. Thermal paper prints only on the . Ensure label roll orientation is correct. | | “Driver not signed” warning | This is common with Chinese OEM drivers. Click “Install anyway” or enable test mode. | | Bluetooth pairing fails | Forget the device → Reset printer (hold power + feed button 10 sec) → Pair again. | | Printer not found over USB | Try a different USB cable (many are charge-only). Use a data sync USB cable . | : First, pair the printer via your PC’s Bluetooth settings
If the paper feeds and prints clearly, your installation is successful. Troubleshooting Common Installation Issues
Select NET or TCP/IP , and enter the IP address assigned to your printer. Step 4: Finalizing and Test Print