Dt6507 Led Mirror Clock Instructions [work] -

:

: If your clock is constantly cycling between Time, Date, and Temperature, press the DOWN button to change display modes.

Last updated: 2025 – Applies to DT6507 firmware versions v2.0 through v3.4. dt6507 led mirror clock instructions

: To turn the screen off entirely at night without unplugging it, press and hold the SNZ/LIGHT button for 3 seconds.

The DT6507 LED mirror clock is a stylish and functional time-telling device that's easy to install and operate. By following the instructions outlined in this article, you can get the most out of your clock and enjoy its features for years to come. If you have any further questions or issues, refer to the user manual or contact the manufacturer's customer support team. : : If your clock is constantly cycling

When using batteries alone, the LED display will turn off after a few seconds to save power. Press any button to wake it up. 2. Setting the Time, Date, and Temperature Unit

While the hour digits are flashing, press or DOWN to adjust the hour. (Note: Look for the PM indicator dot if using 12-hour mode). Press MODE once. The minute digits will begin flashing. Press UP or DOWN to adjust the minutes. Press MODE once to save and transition to the Date Setup. 3. Set the Year, Month, and Day The DT6507 LED mirror clock is a stylish

: Use UP or DOWN to toggle between 12-hour (AM/PM) and 24-hour formats. Press MODE to confirm.

Press the button in normal mode to cycle through brightness levels: L-AU (Automatic): Uses the sensor to detect room light. L-01 (Dark): Lowest brightness. L-02 (Medium): Medium brightness. L-03 (Bright): Maximum brightness. Setting "Night Mode" (Dark Dimmer)

: The clock features an automatic dimming function from 18:00 to 06:00. To customize this, press MODE three times until "OFF" or "ON" appears, then long-press MODE to set custom start and end times.

can be powered in two ways.