Evoko Liso Factory Reset Verified Link

Extract the downloaded Evoko Liso firmware zip file. Copy the unzipped installation files directly to the root directory of the MicroSD card.

How to Perform an Evoko Liso Factory Reset (Verified Methods)

Confirm the choice. The screen will turn black, wipe its current network tokens and application data, and reboot into the initial setup wizard. Troubleshooting Common Factory Reset Issues The Liso is Stuck on the Evoko Logo Screen evoko liso factory reset verified

The latest Evoko Liso firmware image file (downloaded from the official Evoko support portal). Step-by-Step Instructions Phase 1: Prepare the MicroSD Card Insert the MicroSD card into your computer. Format the card to . Extract the downloaded Evoko Liso firmware zip file.

This is the most reliable method to completely wipe and re-flash the operating system on an Evoko Liso. It is highly recommended if your device is stuck in a boot loop or completely unresponsive. Prerequisites A MicroSD card (FAT32 formatted, ideally 4GB to 32GB). A computer with an SD card reader. A paperclip or thin pin. Extract the downloaded Evoko Liso firmware zip file

This usually indicates that the USB drive was not formatted correctly or the firmware files were placed in a subfolder. Ensure the drive is formatted to and try a different, older USB 2.0 drive, as some modern USB 3.0/3.1 drives fail to register during the boot-loading phase. Forgotten Admin PIN

Performing a full reset is a powerful step. The official support documentation confirms it is necessary in several scenarios: The screen will turn black, wipe its current

Press the button inside for approximately 10 to 15 seconds .

Click on the Rooms or Monitoring tab from the main dashboard.

: Plug the prepared USB drive into the port located on the back of the Liso unit.