Turn off all columns, wait 30 seconds, restart master first.
~2,600 mm (low-profile design suitable for standard ceilings)
Whether you are installing a used model, training a new technician, or performing routine maintenance, having a clear understanding of the operational guidelines, safety protocols, and technical specifications is vital. This comprehensive guide serves as an essential reference manual for the Hofmann Duolift GTE 2500. Technical Specifications hofmann duolift gte 2500 manual
The Ultimate Guide to the Hofmann Duolift GTE 2500: Operator Manual, Safety, and Maintenance
The official Hofmann Duolift GTE 2500 manual is typically divided into 10 sections. Here is what each section contains and why you need it. Turn off all columns, wait 30 seconds, restart master first
Approx. 1,900 mm – 2,000 mm (depending on pad adjustment) Overall Width: Approx. 3,100 mm – 3,250 mm Drive-through Width: Approx. 2,200 mm – 2,400 mm Power Supply: 3-Phase AC (typically 400V, 50Hz) Installation and Floor Requirements
Raise the vehicle to the desired working height. Release the button to engage the safety locks. Lowering Procedure Technical Specifications The Ultimate Guide to the Hofmann
| Symptom | Probable cause | Corrective action | |---------|----------------|--------------------| | One column lags >10 mm | Wireless interference | Connect sync cable | | Lift stops with error code E-05 | Overload on one column | Redistribute vehicle load | | Column does not respond | Emergency stop activated | Twist emergency stop to reset | | Uneven lowering | Air in hydraulic system | Bleed cylinder (see sec. 6) |
Hofmann Duolift GTE 2500 a professional-grade, electromechanical two-post lift designed for lifting cars and vans with a gross vehicle weight of up to
Insert safety anchor bolts and torque them to manufacturer specifications. Alignment and Levelling Use a spirit level on both columns.