Motherboard Manual New - Hp Ms7860 Ver 12
Requires a 135W HP Smart AC Adapter (7.4mm x 5.0mm barrel). Using a 65W or 90W laptop charger will often result in a "Power Adapter Warning" at boot.
| Component | Specification | | :--- | :--- | | | Micro-ATX (24.4 cm x 24.4 cm) | | CPU Socket | LGA 1155 (Supports 2nd & 3rd Gen Intel Core) | | System Memory | 4 x DDR3 DIMM Slots (240-pin) Speeds: 1066 / 1333 / 1600 MHz | | Expansion Slots | 1 x PCI Express x16 (Gen 3.0) 2 x PCI Express x1 1 x PCI (Legacy) | | Storage | 2 x SATA 6.0 Gb/s 4 x SATA 3.0 Gb/s | | Audio | Realtek ALC221 / ALC662 Audio Codec | | LAN | Intel 82579LM or Realtek Gigabit Ethernet | | Video Output | VGA, DVI-D, DisplayPort (Model dependent) |
If you are locked out of the BIOS, look for a green jumper near the SATA ports labeled . Turn off the PC and unplug the power. Remove the green jumper. Power on the PC (the password is now cleared). Replace the jumper to set a new password later. CMOS Reset (CLR_CMOS) hp ms7860 ver 12 motherboard manual new
Intel H81 or H87 Express (varies by specific PC model).
Official HP MS-7860 (Version 12) Motherboard Manual – New Edition Requires a 135W HP Smart AC Adapter (7
Unlike consumer boards, HP OEM boards like the MS-7860 do not always print the jumper function directly on the PCB, and HP official documentation often omits the specific layout due to OEM confidentiality. However, standard troubleshooting applies:
The HP MS-7860 Ver 1.2 Go to product viewer dialog for this item. Turn off the PC and unplug the power
:
Finding documentation for older, proprietary hardware like the can be a challenge. This board is typically found in legacy HP Compaq business desktops, specifically the HP Compaq Elite 8300 Ultra-Slim (USDT) series.