Manual ((install)) - Keyence Gs-11pc

Supports up to 30 units in a single cascade, ideal for large machines with multiple access points. 2. Installation and Technical Specifications

If you need help checking the price or finding a supplier for the , I can help you search for that.

Its non-contact design offers high tolerance for misalignment (up to 5 mm), preventing nuisance trips caused by door sag or machine vibration.

You can connect up to 25 units in a single chain while maintaining Category 4 / PLe safety ratings. Technical Specifications keyence gs-11pc manual

The actuator can approach the switch from the front or the sides. Always refer to the sensing curves in the official datasheet if operating at extreme angles.

Guard open, actuator not detected, OSSDs are OFF.

IP65/67/69K rated, making it suitable for washdown environments and high-pressure cleaning. Supports up to 30 units in a single

Meets PLe, Category 4 (EN ISO 13849-1) and SIL3 (IEC 61508) standards, ensuring maximum safety integrity.

Inspect structural door hinges for mechanical play or sagging that changes the alignment during operation.

Auxiliary Output / Reset Input (Configuration dependent) Always refer to the sensing curves in the

uses dual OSSD (Output Signal Switching Device) safety outputs to communicate with safety controllers or PLCs

The is a highly reliable, non-contact safety interlock switch designed to ensure operator safety by monitoring the position of machine guards . As part of the GS Series, it offers a robust solution for detecting door positions in industrial environments. Proper installation and operation, as detailed in the Keyence GS-11PC manual , are crucial for complying with safety regulations.