Kincaid Radio Controlled Clock Instruction Manual File

Do not expose the clock to extreme temperatures (below 14°F / -10°C or above 122°F / 50°C), direct sunlight for extended periods, or high humidity environments like bathrooms.

Setting Your Kincaid Radio Controlled Clock Setting up a Kincaid radio-controlled (atomic) clock typically involves an automatic synchronization process with the WWVB radio signal from Fort Collins, Colorado. Whether you have an analog or digital model, follow these steps to ensure accurate timekeeping.

Setting up a Kincaid clock typically involves a simple automated sequence: Preparation kincaid radio controlled clock instruction manual

This indicates the hands have lost their reference position.

Look for these indicators:

To set the time and date on your Kincaid radio controlled clock, follow these steps:

If you reside in Arizona, Hawaii, or parts of Indiana/Canada that do not observe DST, look for a switch or button labeled DST on the back of the clock and toggle it to the OFF position. This prevents the clock from altering its time during seasonal changes. 4. How to Manually Set the Clock Do not expose the clock to extreme temperatures

When you see this, replace the battery immediately to prevent loss of internal time memory. After changing the battery, hold the SYNC button for 10 seconds to reinitialize.

The clock receives this signal automatically every night. If the clock loses the signal for a few days, it will continue to run on its internal quartz mechanism but may drift slightly until it reconnects with the radio signal. Setting up a Kincaid clock typically involves a

to adjust the flashing value to the correct current setting.

Front: