Tgc Bc901h Manual [exclusive] Jun 2026

Disconnect or switch off the main electrical power source to the water heater unit for 10 seconds.

If the water heater is left idling in standby mode for longer than 10 minutes , any high-temperature setting above 50°C will automatically reset down to 48°C . This keeps the next user safe from unexpected bursts of scalding water. Advanced Features: Eco Mode and Pre-Heating

If another remote in the house is being used, your remote's priority light will flash continuously . tgc bc901h manual

For safety, if the heater is in "standby" (unused) for more than 10 minutes, temperatures previously set above 50°C will automatically reset to 48°C for the next user. Technical Support

When multiple remotes are installed (e.g., in a kitchen and a bathroom), the ensures only one person controls the temperature to prevent accidental scalding. If the Priority light is flashing, it cannot be changed. Disconnect or switch off the main electrical power

For expert assistance or repairs, contact the Towngas Customer Service Hotline at .

Check if the main unit has power. Ensure the on/off button has been pressed. Advanced Features: Eco Mode and Pre-Heating If another

For official technical support or to schedule mandatory safety inspections, contact the Towngas Customer Service Hotline directly at . Share public link

: Under Hong Kong gas safety ordinances, any internal repairs, structural placement changes, or gas line installations involving Towngas infrastructure must be performed exclusively by a Registered Gas Installer (RGI).

You cannot change the Priority control while hot water is currently running.