Vw Polo 6n Dashboard Removal Updated 'link' [ 90% TRENDING ]

Unscrew the plastic steering column shrouds (upper and lower covers) using a Phillips screwdriver.

: T20 and T25 Torx screwdrivers, a 10mm socket/ratchet, and plastic trim removal tools.

: Remove the plastic trim around the gear lever gaiter and ashtray. Unscrew the T20 bolts located inside the ashtray housing and at the base of the console. vw polo 6n dashboard removal updated

Unbolt the bracing brackets located behind the radio aperture that connect the dashboard to the central floor tunnel. Inside the Engine Bay (Plenum Chamber) Open the hood and remove the windshield wiper arms.

Ensure all wiring harnesses connected to the dash are unplugged (heater controls, hazard switch, light switch, airbags). Unscrew the plastic steering column shrouds (upper and

You must remove the steering wheel and column switches to allow the main dashboard shell to slide backward.

The dashboard is held in place by a series of mounting brackets: Unscrew the T20 bolts located inside the ashtray

Undo the prominent bolts located on the left and right structural pillars (A-pillars) near the door hinges.